Sundance SMT6012 v.4.6 User Manual

SMT6012 User Manual Version 4.6 User Manual (QCF42); Version 4.6, 26/06/02; © Sundance Multiprocessor Technology Ltd. 2002

Version 4.6 Page 10 of 22 SMT6012 User Manual Figure 4 - Specifying the driver configuration file • Select the “Auto-generate board data file wi

Version 4.6 Page 11 of 22 SMT6012 User Manual Figure 5 - Setting the I/O Port address. • Now change “Value” to the I/O Port address that can be

Version 4.6 Page 12 of 22 SMT6012 User Manual Figure 6 - Specifying the processors • Select the processors that you have on your carrier board.

Version 4.6 Page 13 of 22 SMT6012 User Manual Figure 7 - Specifying the GEL file • If you are using a GEL file, you can specify it at this stag

Version 4.6 Page 14 of 22 SMT6012 User Manual Figure 8 - Multiple independent boards 5.4 Setting up Code Composer Studio version 1.2 • Run t

Version 4.6 Page 15 of 22 SMT6012 User Manual • In the “Available Boards/ Simulator types” window, double-click the “tixds6000” driver. • Click

Version 4.6 Page 16 of 22 SMT6012 User Manual Figure 11 - Specifying the processors • Select the processors that you have on your carrier board.

Version 4.6 Page 17 of 22 SMT6012 User Manual For Windows 95/98 • Add the following entries in your “Autoexec.bat” file. SET UNIFY_PODDRVR_E =

Version 4.6 Page 18 of 22 SMT6012 User Manual • The selected driver should now be displayed in the "Available Board/Simulator Types" pa

Version 4.6 Page 19 of 22 SMT6012 User Manual 6 Master/Slave configuration It is possible to use a carrier board as a master board that is used to

Version 4.6 Page 2 of 22 SMT6012 User Manual Table of Contents List of abbreviations...

Version 4.6 Page 20 of 22 SMT6012 User Manual Figure 13 - CCS setup for the sample configuration 7 Problematic configurations 7.1 Using C4x type

Version 4.6 Page 21 of 22 SMT6012 User Manual Figure 14 - Example setup for mixed C4x and C6x processors 7.2 Code Composer Studio setup for mixe

Version 4.6 Page 22 of 22 SMT6012 User Manual 7.5 Using a C6x to program a C4x (Hex Loader) It is possible to boot a C4x using a C6x processor. Fo

Version 4.6 Page 3 of 22 SMT6012 User Manual List of abbreviations CC Code Composer CCS Code Composer Studio cPCI Compact PCI DSP Digital signa

Version 4.6 Page 4 of 22 SMT6012 User Manual 1 List of figures Figure 1 - JTAG Chain...

2 Introduction The SMT6012 provides the drivers required to use Code Composer (CC) and Code Composer Studio (CCS) with the following Sundance Mu

Version 4.6 Page 6 of 22 SMT6012 User Manual You need to have at least the following version of CC or CCS installed. Processor type CC or CCS ver

Version 4.6 Page 7 of 22 SMT6012 User Manual 4 Debug configurations The Sundance carrier board includes a JTAG controller chip. This chip enable

Version 4.6 Page 8 of 22 SMT6012 User Manual 5 Software Installation and Setup Insert the SMT6012 CD into your CD drive. If the setup program doe

Version 4.6 Page 9 of 22 SMT6012 User Manual driver you should use may depend on the silicon rev of the processor you are using. • Note: For illus