Sundance SMT8090-395 User Manual

User Manual (QCF42); Version 3.0, 8/11/00; © Sundance Multiprocessor Technology Ltd. 1999 SMT8090_395 User Manual

Version 1.2 Page 10 of 12 SMT8090 User Manual 6 – Connect external sources to J1, J4, J5 and J6 via MMCX-BNC cables. Make sure that the external

Version 1.2 Page 11 of 12 SMT8090 User Manual Software applications. 3L application. In a sub-folder labelled 3L (directory SMT6600\Systems\SMT8

Version 1.2 Page 12 of 12 SMT8090 User Manual “Configuring FPGA - FPGA Already configured - Loading END key only” In the case where the FPGA

Version 1.2 Page 2 of 12 SMT8090 User Manual Revision History Date Comments Engineer Version 08/07/04 First release PSR 1.0 20/08/04 Correc

Version 1.2 Page 3 of 12 SMT8090 User Manual Table of Contents Revision History...

Version 1.2 Page 4 of 12 SMT8090 User Manual Contacting Sundance. You can contact Sundance for additional information by sending email to support

Version 1.2 Page 5 of 12 SMT8090 User Manual Outline description. The SMT8090_395 is a single-C6416T based module (SMT395) combined with a dua

Version 1.2 Page 6 of 12 SMT8090 User Manual Architecture. The following diagram shows the architecture of the SMT8090 system: SMT390DAQModule

Version 1.2 Page 7 of 12 SMT8090 User Manual Hardware involved. The SMT8090_395 is built around two main modules but also involves a carrier bo

Version 1.2 Page 8 of 12 SMT8090 User Manual Hardware installation. Here are the steps to follow to install the SMT8090_395 system. 1 – Place t

Version 1.2 Page 9 of 12 SMT8090 User Manual b – Then fit four M2 nuts on each screw. c – Place the SMT338 on the second site (SMT395 already